MODEL TYPE |
E3 SPC 1210 |
E3 SPC 3210 |
E3 SPC 3420 |
E3 SPC 3630 |
|---|---|---|---|---|
| Size | 55H x 30B x 20Dcm | 55H x 30B x 20Dcm | 55H x 30B x 20Dcm | 55H x 30B x 20Dcm - 2 units |
| Weight | 18 Kg | 25 Kg | 28 Kg | 21 Kg + 27 Kg |
| Casing | Vented Power coated Galvanised | Vented Power coated Galvanised | Vented Power coated Galvanised | Vented Power coated Galvanised |
| Mounting | Wall mounted - brackets | Wall mounted - brackets | Wall mounted - brackets | Wall mounted - brackets |
| Voltage | All voltage levels compatible | All voltage levels compatible | All voltage levels compatible20 | All voltage levels compatible |
| Phase | Single Phase | 3~Phase | 3~Phase | 3~Phase |
| Lamp Type | All Fluorescent (excludes some electronic ballasts) and HID | All Fluorescent (excludes some electronic ballasts) and HID | All Fluorescent (excludes some electronic ballasts) and HID | All Fluorescent (excludes some electronic ballasts) and HID |
| Max Load - Uncontrolled | 40 amps = approx 200 36W lamps - Single phase | 15 amps per phase = approx 230 36W lamps over 3~phases | 25 amps /phase = approx 420 36W lamps over 3~phases | 40 amps / phase = approx 600 36W lamps over 3~phases |
| Connection | Direct to standard MCB - included in integrated sub board - 6mm | Direct to standard MCB - included in integrated sub board - 1.5mm | Direct to standard MCB - included in integrated sub board - 2.5mm | Direct to standard MCB - included in integrated sub board - 6mm |
| Output | Up to 18 circuits on integrated sub-board | Up to 17 circuits on integrated sub-board balanced over 3 phases | Up to 17 circuits on integrated sub-board balanced over 3 phases | Up to 20 circuits on integrated sub-board balanced over 3 phases |
| Voltage Out | -13.75% | -13.75% | -13.75% | -13.75% |
| Load Out VA | - 33% nominal | -33% Nominal | -33% Nominal | -33% Nominal |
| Power Factor | improved +5 - 20% (site dependent) | improved +5 - 20% (site dependent) | improved +5 - 20% (site dependent) | improved +5 - 20% (site dependent) |
| kWh Reduced | -25% to 33% | -25% to 33% | -25% to 33% | -25% to 33% |
| Lumen output | Approx 95% - Fluorescent | Approx 95% - Fluorescent | Approx 95% - Fluorescent | Approx 95% - Fluorescent |
| Lumens / Watt - efficacy | (No SPC) -100% (SPC) -128.5% | (No SPC) - 100% (SPC) - 128.5% | (No SPC) - 100% (SPC) - 128.5% | (NO SPC) - 100% (SPC) - 128.5% |
| CO2-e reduced | Full Load (5000 light hrs / year) - 33 tonnes / annum (approx) | Full Load (5000 light hrs / year) - 38 tonnes / annum (approx) | Full Load (5000 light hrs / year) - 63 tonnes / annum (approx) | Full Load (5000 light hrs / year) - 100 tonnes / annum (approx) |
Standard facilities available with all models:
- Manual Bypass / Over-ride Selector Switch
- Fault indicator LED
- On-board diagnostic LED indicators
- Integrated single and 3~phase distribution sub-board
- Up to 20 different lighting circuits on a single unit
- Each circuit independent with own circuit breaker
- Convenient wall mount bracket
- Tool removeable unit lid and convenient lift-off circuit breaker panel cover
- All functions visible externally
- multiple duct entry for wiring connections
- High quality Galvanised Powder Coated Casing
- Twin comms serial ports / data retrieval (subject to provision of protocols)
- Expansion port with digital and analogue application
- Immediate performance verification available
- 2 year on-site warranty
- Full Installation instructionsprovided
- Full Operating procedures provided
- Comprehensive extended warranty and service program available
The Smart Power Controller Advantage….
- Power saving between 25% and 33%
- Power factor improvement of typically around 10%
- Extends lamp life - lower maintenance
- reduces Greenhouse Gas Emissions.
- May provide HVAC benefit - ballast 26% cooler operation
- Easy installaion - minimal disruption to work place.
- Large capacity - small footprint
- Uses zero current switching for control - NO Noise / Harmonics created.
- Does NOT alter the existing wave form
- Brown out protection – Automatically revert to normal mode if input voltage drops below a minimum pre determined level
- Has no effect on starters – will not cause starters to strike.
- Compliance exceeds existing electrical safety standards.
- complies with existing EMC / RFI standards - CTick (N14977).
- Patents granted internationally
